Application
Shorten cycle time and stop leakage
Increase back pressure
Combination with filter or color mixing
Polymers
PA6, PA66, PE, PP, PS, ABS, PET, etc. (Not applicable for PVC)
| Parameters | Unit | VP-1/VH-1 | VP-2/VH-2 | VP-3/VH-3 |
| Max. Injection Rate | cm3/s | 500 | 3500 | 5000 |
| Max. Screw Diameter | mm | 50 | 120 | 240 |
| Max. Machine Tonnage | Ton | 300 | 1200 | 3000 |
| Body Length (B) | mm | 140 | 180 | 326 |
| Heater (H) | mm | Φ60×80L | Φ80×100L | Φ110×180L |
| M | mm | 85 | 100 | 170 |
| N | mm | 72 | 80 | 135 |
| P | mm | 55 | 65 | 90 |
| Air Cylinder Pressure | Bar | 6 | 8 | 10 |
| Oil Cylinder Pressure | Bar | 30 ~ 70 | ||
| Max. Injection Pressure | Bar | 3000 | ||
| Max. Temperature | ºC | 400 | ||
